Mold making and Casting products through EnvironMolds, LLC

Alginate is easy to work with and delivers excellent results as long as you follow certain pertinent rules about measuring and mixing the alginate. Know what you should and shouldn’t be doing with alginate.

You almost cannot imagine making body molds and life casts without alginate. This ever-resourceful compound comes in the form of a simple white powder. In fact, it is very similar to what dentists use for making tooth impressions.

The alginate used in life casting is fun to work with. All you have to do is mix it with water to form a smooth and creamy paste. Applying it all over the body part to be cast and reinforcing it with a shell mold will yield a detailed mold that meticulously captures the fine hair, skin folds and fingerprints too.

However, you need to work carefully when mixing the alginate. The first rule is to always weigh out the powder to get the ratio exactly right. This is because alginate is compressible and measuring the quantity by volume will wreak havoc on the proportions. Use a weighing scale and always make a little extra mixture than required. This will prove handy as the alginate tends to set very quickly and you may not have time on hand in case the mixture falls short.

Another rule of thumb is to always use soft water for mixing alginates. If you inadvertently happen to use hard water, you will end up with a lumpy mess that is mostly unusable. In a pinch, use mineral water rather than risking the unknown tap water!

You can even play around with the temperature of the water to vary the expected set time of the alginate paste.

When you are actually mixing, always place the powder in the container and then pour the required water and not vice versa. Blend them rapidly, but take care not whip air into the mix. Rather than whisking by hand, use a turbo mixer on a variable speed drill to get a smooth and lump-free paste.

Always source your alginates and other materials from reliable suppliers like EnvironMolds (www.artmolds.com).

Far from being an agonizing or unpleasant experience, getting a life cast done can actually turn out to be quite easy and even enjoyable! Why not open yourself up to this soothing pleasure once?

The beautiful art of life casting opens up a novel avenue of getting a three dimensional likeness of yourself. You can choose any part of your body and the life cast will reproduce the exact surface features in all their glory.

However, many people still hesitate to get a life cast done. They despair that they will find it intolerable when the life casting artist actually makes a mold on their body. While hands and feet are considered acceptable, getting the gooey mold making material on their face or torso can seem quite awful at first. They are also nervous about having to hold a stationary pose for the body mold making process.

The Reality is Different!

Once you go in for a life cast, you will be surprised to find that body casting is not a distressing experience at all! It actually feels like a gentle massage when the artist applies the mold making alginate or silicone rubber on your body. On the face, it is akin to a soft facial.

Being enclosed in the warm mold making material while it sets can truly be quite soothing. The body feels loose and relaxed.

And holding the same pose will not really be very difficult. Firstly, the artist will ensure that you are totally comfortable in the chosen position. He will provide supports if needed and also instruct you on how to breathe calmly. You will discuss signals in case of any distress.

Staying quiet and still in the same pose for an extended time can further relax the body. You will enter a tranquil state of meditation and may even fall asleep during the process.

Little wonder that models that are frequently hired for regular body casting eagerly look forward to this serene experience!

You can find out more about life casting and what it involves on the EnvironMolds website – https://www.artmolds.com

Rubber material can be classified into distinct families based on its properties and usage. The varying rubber options can be used for different types of mold making and casting applications.

Rubber is essentially a simple material that is derived from the sap of trees. This milky white, sticky and elastic material has become almost indispensible in the world of mold making and casting.

The rubber is available in many different types and forms. Think – latex rubber, polyurethane rubber, silicone rubber, thermoset mold rubber and you will get the picture.

It goes without saying that each rubber has its own distinct properties and the use varies accordingly. Moreover, the same rubber is formulated differently to suit mold making and casting applications.

 For instance, liquid latex can be used for capturing molds from rough surfaces or when you have to cast abrasive materials. The economical material can even be applied to vertical surfaces or models where they are itself without the risk of run-off. It is particularly favored for creating special effects on actors. In its casting form, the less viscous latex rubber proves to be very useful for making latex masks, props and other thin skin products.

On the other hand, silicone rubber is more expensive, but it is still widely used for making silicone molds and casts. This rubber can be used for various applications – even food safe and skin safe variations are available. While the former is suitable for food molds, the latter can be easily applied on the human body for making life casts. The main advantage is that silicone does not stick to anything but itself – this allows for easy demolding from the model or mold.

While artists tend to use mold making silicone rubber for casting works too, special variants have also been developed. A skin-colored, translucent option makes doll reborning possible – it is soft and stretchable like skin, but still stays tough and tear-resistant like all other rubbers.

Similarly, polyurethane or thermoset mold rubbers come with their own distinct properties and usage.

You can check out the various rubber families and their use on the EnvironMolds website, https://www.artmolds.com

There are different clays and it’s quite easy to work with them. Cleaning your clay mold is also a simple process. Just don’t make the mistake of soaking the clay in water as this will damage the mold!

Clay is a simple and versatile material that has become the modeling material of choice for all kinds of people. Children enjoy playing with regular water-based clay which becomes hard when exposed to air. On the other hand, there is plasticine clay that stays moist no matter how many times it is used.

Then there are oil-based clays, sulfur-free clays, pottery clays and even self-hardening clays. Some clay comes in different colors and even varying degrees of hardness. These are used by different artists depending on the type of artwork and other preferences.

One of the common uses of clay is making molds for casting projects. It is malleable and can be easily shaped over the object to create a negative impression mold. The mold can stay soft and reusable or become hard depending on the type of clay used. Different materials can be cast in a clay mold like plaster, resin, rubbers, etc.

Once the clay mold is ready, you will want to clean and finish it before proceeding to the casting end of things. Casting artists usually wash their molds with water or even soak them for a while to get rid of the excess mold making material, release agent, etc.

However, you should take care never to wash or soak a clay mold. This can cause the mold to break, crack or just reduce the life of the mold.

If you want to clean it, just wipe it with a wet cloth, sponge or soft toothbrush. Else, spray a fine mist on the mold before wiping it off. In fact, try to do the cleaning soon after demolding from the model as cleaning dried clay becomes more difficult. The same process can be followed for cleaning the mold after the casting is done.

You can easily order Plastilina clay and other materials as well as get a lot of handy tips or guidance from the EnvironMolds website, https://www.artmolds.com.

Liquid latex rubber is a simple and easy to use compound. The properties are varied – ranging from economical to tough and durable. However, proper usage is essential to make the most of the rubber.

Latex rubber is a natural rubber with a base of water and ammonia. It is an inexpensive material that is available in a ready-to-use form - no measuring or mixing is required at all. What’s more, the same latex comes in two types – mold making rubber and casting rubber.

The latex rubber is easy to use and works to be the most economical of all mold making and casting materials. However, there are certain precautions that the artist should keep in mind to be able to use the rubber compound well. Such as –

•    Latex comes in a liquid form. The rubber can last for years as long as it is kept in an air-tight container and away from direct sunlight. Exposure to air or light will cause the latex to turn pink. Yet, this does not affect its workability.

•    In case the latex gets thick, it can be thinned easily by adding a bit of water or household ammonia itself.

•    Do not allow the rubber to freeze as this will render it unusable.

•    Making a latex mold takes time and patience. Do not pour the liquid latex over the model and expect it to set solid. The latex should be applied one coat at a time, with each coat being allowed to air dry properly before applying the next one. Else, the outer layers will set before the inner layers, causing pooling, soft spots or even rendering the mold unusable. 7 to 10 coats are usually required to build up the thickness of the mold.

•    A latex cast can be made only in a plaster mold. The process is simple – just pour the liquid latex into the mold, swirl it well and leave it for some time before pouring out the latex once again. A thin skin will be left behind in the mold that cures quickly. This procedure is commonly used to make a latex mask.

•    A latex mold or cast cannot be colored in the usual manner using regular paints and dyes as they will tend to crack. Special latex pigments in different shades are available in art stores. The required color can be added to the liquid latex or even painted on a cured latex surface. For the latter, the pigment should be diluted with liquid latex rubber itself. Some artists even mix clothing dyes in the liquid latex.

•    A cured latex mold or cast will last long – for 20 years or even more. Cured latex can be vulcanized or dipped in boiling water to prolong its life.

•    Latex rubber is easy to clean as well. Just allow the spilled rubber to set and it can be peeled off easily. Tools and brushes can be cleaned with warm water itself.

The crafting industry has always focused on casting and mold making. Although their uses and applications are varied and longstanding, they play a pivotal role in today's artistic production as well as industrial manufacture. From leagues of centuries ago, sculptors and other artists have used plethora of techniques to make life-like casts. Today of course, the methodology has gone through a sea-change but the basics remained the same.


So before we get into the process of how to make molds, let’s understand what exactly this thing is. Mold is a distinctive block with a hollow cavity made out from a desired model (object). A mold is used to create the cast by pouring liquid wax (or other preferred molten material) into the hollow cavity. To remove the cast from the mold, a releasing agent is used which is nothing but a specific chemical that stops the both from sticking to each other.

Ceramics and glass items for tableware perhaps have been the oldest uses of molding and casting. Whether you want to make one or a hundred replicas of the original, you can do it with a mold.

The steps are generally pretty easy to follow even for the first time mold maker. Get the mix ratio correct (follow the instruction on the kit) although no weighing is necessary as such. Next, pour the material over the desired object and set it aside. If the model is some part of your body like the hand, keep it still. The set time is different for different materials. For instance, alginate sets faster in warn water than when mixed in cold water. After it is set completely, it is advices to reinforce the alginate with a plaster jacket of bandage. Once it’s cured, the entire thing is removed as one. This takes a bit of caution as alginate is very fragile. It can then be colored if required.



EnvironMolds is one of the reputable names in the casting and molding industry. You can order the kits for mold online from their website https://www.artmolds.com/. They also have the guided video instruction to follow in case you want to learn it on your own!

The fault lies not in the material or the technique, but in the paints themselves. Regular paints just do not work well will rubber or resin materials. And this is exactly why EnvironMolds has devoted a complete section to specialized paints and dyes like silicone paint, latex paint and resin paint.



On the www.artmolds.com website, you can easily locate this segment under the Art Supplies tab. It throws up various options of specially created painting and pigmenting systems for latex, silicone and polyurethane applications.

There are a range of pigments that should be mixed with the corresponding paint medium before painting on a cured surface. Or you can also mix the pigment directly in the casting material itself before adding the catalyst to get a uniform intrinsic color on the entire cast.



There is also an exceptional offering called I-Glo photo-luminescent pigments. This comes in a crystal form and can be mixed into a clear casting resin or sprinkled over a finished surface before sealing it. It will create a glowing effect in the dark by absorbing light during the day. The pigments are invisible during the day, thus creating two distinct looks for the artwork.

All the above pigments are so formulated that they bond with the rubber or resin material. As they become a part of the cast itself, they will not chip, crack or rub off at all.

So, remember to use the right resin, latex or silicone paint for finishing your cast!