CastRite Art Casting Stone For Plaster Casts

Posted by EnvironMolds , Labels: , , , , , Tuesday, January 28, 2020 10:04 PM

A wide variety of plaster powders are available in the market – each with their own functions and properties. Choosing the right option for making a cast becomes difficult for novice artists.

The art world is choc-a-bloc with varied materials for making molds and casts. The choice ranges from simple clay, wax and plaster to more sophisticated options like resins, latex rubbers, silicone rubbers and more. Even when it comes to using plaster, mold makers and casting artists are often flummoxed whether they should use regular plaster of Paris or the more refined casting stone powders available in art stores.

Well, fact of the matter is that generic plaster tends to be chalky and fails to hold details well. Casts made from this powder will be prone to chipping and cracking too. On the other hand, casting stone powders are made with gypsum that is especially heat treated to make it suitable for fine art casting.




































CastRite Art Casting Stone is a top quality, high definition casting stone powder offered by EnvironMolds. It is a popular material of choice for making art castings of all types. It is easy to work with, gives a natural bright white finish, holds finishes well and is extremely durable.

The CastRite powder is a highly dense formula that is suitable for making casts from alginate, resin and silicone molds. It can be cast into plaster bandages as well. Apart from casts, it is also commonly used for making shell molds for latex slip castings and backup flexible molds. At times, fiberglass fiber is added to the mold powder for additional strength.

How to use?

Take 2 equal parts of CastRite Art Casting Stone powder and 1 part of water by volume. First pour the water into a mixing container and then add the casting stone powder very slowly. Mix with a stirring stick while scraping the sides and bottom of the container till the mixture becomes thick and creamy. The material is ready for pouring into the mold for making the cast. This formula inherently has minimum air bubbles; even these can be eliminated by rotating the mold slowly in all directions.

0 Comments

Safety Precautions When Working With Resins

Posted by EnvironMolds , Labels: , , , , , Tuesday, January 14, 2020 4:00 AM

Resin is a commonly used material for making different types of casts. It is fun to work with especially when making artistic jewelry and other casts. However, some safety measures are needed.

Resin is a viscous material that slowly hardens and sets solid in the form of a plastic. It comes in various types – like epoxy, polyester and polyurethanes. Resin casting is very popular among professional artists and novices alike.

The uses are varied ranging from artistic jewelry and faux metal casts to small parts in manufacturing industries to 3D printing to even gluing things together.

While resin lends itself well to many a use, the artist has to handle the material carefully and keep the following precautions in mind:
  • Some resins are considered volatile chemicals and should not be allowed to come into contact with the bare skin. Even the catalyst can prove to be risky. Always wear protective gloves when working with resin. Use a plastic apron to avoid ruining the clothes with spilled resin.
  • It is better to wear safety goggles and use a respirator when working with large quantities of resin. This will help shield against the noxious fumes.
  • The work area should be properly ventilated with open windows and an exhaust fan.
  • It is better to spread some wax paper on the work surface before using resin. As resin will not stick to the wax paper, it will be easy to clean. The dried resin can be simply peeled off from some materials; else it can be cleaned with rubbing alcohol.
  • But never use the alcohol or other solvent in case the resin comes in contact with the skin. Try to wipe it off immediately with baby wipes. Sticky resin can be scrubbed off with soap or a pumice stone.
  • Maintaining the ideal environment is crucial when working with resin. 70°F is considered the standard temperature as the resin fails to cure properly if the studio is hotter or cooler. Therefore, an air conditioner or heater may be required.
  • The resin and hardener should be measured accurately using measuring cups. Do not go by ballpark approximations as it can again affect the curing of the resin.
  • The materials should be mixed carefully and thoroughly using stir stix for a couple of minutes to ensure a uniform mix. However, overmixing can also introduce air bubbles into the casting material.
  • Some air is bound to get trapped into the resin and will show up on the surface of the cast. This can be popped with a needle or heat gun. Casting in a pressure pot is ideal for eliminating the air bubbles.
  • The resin is likely to attract dust or animal hair while it cures and will end up ruining the resin casting. Keep the studio clean and cover the cast with a clear dome while it cures.
  • Above all, follow the manufacturer’s instructions and safety precautions to the T.

0 Comments
Subscribe to: Posts (Atom)