Making a life cast requires meticulous attention to a range of details. Whether the model is posing in a horizontal or vertical position can also make a world of difference to the face mold and life cast.
Life casting is a beautiful art of replicating the human body in its three-dimensional form. The entire body or any specific parts can be represented in a life cast. While people do commission life casts of their hands, feet, breasts, pregnant belly, torso and so on, the face cast remains quintessentially popular.
Life casting is a beautiful art of replicating the human body in its three-dimensional form. The entire body or any specific parts can be represented in a life cast. While people do commission life casts of their hands, feet, breasts, pregnant belly, torso and so on, the face cast remains quintessentially popular.
Alginate is usually the material of choice for making a body mold. The material is safe for the skin, dries quickly and can capture the fine indentations of the body.
The actual process of making a life cast begins with counseling and prepping the model for the session. The life casting artist will clarify possible discomfort, safety precautions and other details with the model. He or she will secure the model’s hair and apply a fine coat of petroleum jelly so that the alginate does not tangle in the body hair.
It often happens that the model may prefer lying down during the process. The artist too may agree thinking that it will keep the model at ease and allow for easy application without any movement.
However, they should keep in mind that lying down in a prone position will pull the skin down and can cause the face to distort slightly. The change may not be visible to the eye but will show up in the body mold. Moreover, the additional weight of the alginate mix and plaster bandages that are applied subsequently also have to be considered. This can make the face cast look flawed or even disfigured.
Therefore, it is always better to have the model sitting upright for the face cast. The pose also has to be planned and tested carefully. Even holding the face at an angle can make the life cast look deformed.
In sum, life casting is a challenging art that requires careful planning and precision of various parameters.
Artists can source the alginates, plaster and other materials from the EnvironMolds website, https://www.artmolds.com.
The actual process of making a life cast begins with counseling and prepping the model for the session. The life casting artist will clarify possible discomfort, safety precautions and other details with the model. He or she will secure the model’s hair and apply a fine coat of petroleum jelly so that the alginate does not tangle in the body hair.
It often happens that the model may prefer lying down during the process. The artist too may agree thinking that it will keep the model at ease and allow for easy application without any movement.
However, they should keep in mind that lying down in a prone position will pull the skin down and can cause the face to distort slightly. The change may not be visible to the eye but will show up in the body mold. Moreover, the additional weight of the alginate mix and plaster bandages that are applied subsequently also have to be considered. This can make the face cast look flawed or even disfigured.
Therefore, it is always better to have the model sitting upright for the face cast. The pose also has to be planned and tested carefully. Even holding the face at an angle can make the life cast look deformed.
In sum, life casting is a challenging art that requires careful planning and precision of various parameters.
Artists can source the alginates, plaster and other materials from the EnvironMolds website, https://www.artmolds.com.
0 Response to "Face Cast – Lying Down or Sitting Up?"
Post a Comment