How To Use Silicone Rubber

Silicone rubber is a material of choice for making molds of figurines, giftware and robotic figures to even prototype tooling, prosthetic pieces and special effects. A wide variety of silicone rubbers are available in the market ranging from the regular silicone formulations to skin safe, food safe and skin-like translucent options.



Not only does silicone perfectly capture the surface details of a model, but the rubber is very simple to use too. Following is a look at what goes into making a simple silicone mold:

•    Silicone rubber is a two-component material with the base and catalyst usually mixed in the ratio of 10:1 by weight. You need to stir and shake them properly before weighing the appropriate amounts in separate containers. Place the base material in the mixing container and roll it around to coat the sides as well.

silicone RTV rubbers

•    Pour the catalyst into the container and mix them thoroughly making sure that any material is not left unblended on the sides or bottom. You should not use a mixer machine or even mix too vigorously as this will introduce air bubbles into the silicone rubber.

•    Despite the most careful mixing, some air is bound to get entrapped in the mix and will form unsightly bubbles on the mold. Degassing in a vacuum chamber will release the air and make the rubber bubble-free.

•    Once vacuumed, slowly pour the mixture in a thin stream from a corner of the mold box till a thick and even layer forms all over the model.



Quality Silicone Mold Rubbers


•    Keep in mind that though the work life of silicone varies from one brand to another, it is usually under an hour. Even the pot life is limited to a couple of hours at best.

•    As silicone rubber does not stick to anything but itself, it will get demolded easily. Yet, some mold makers prefer to coat a thin layer of release agent to allow the mold to slide off without any effort. Sealing the model and mold box is essential as the rubber may get absorbed into them.

•    The rubber mold requires 16 to 24 hours to air cure. Demold only when the mold feels rigid and is no longer tacky. Allow it to remain at least another day before proceeding to casting. Full cure may take almost a week.

•    The cured silicone rubber mold is usually blue in color. It will reproduce the exact detail, have a smooth finish and is ready for casting. You can cast polyurethane resin, epoxy resin, polyester resin, polyurethane rubber and many other materials in the silicone mold simply by pouring the material into the mold. Demolding the cast is also easy as silicone rubber will not stick to anything.

mold making silicone rubber


In sum, silicone rubbers are a great option for making molds of various objects.

12 Response to "How To Use Silicone Rubber"

  1. Exactsilicone says:
    October 9, 2018 at 10:12 PM

    Silicone molded products are good for multipurpose. keep posting this kind of blogs.

  2. lettyharry says:
    October 29, 2018 at 12:00 AM

    I welcome all the suggestion mentioned in this blog related to new learning skills. It is definitely going to help me to adopt new exited way of learning. I think, others will also feel helpful this blog for their needs.
    ยาง ซิ ลิ โคน

  3. acumedica says:
    November 19, 2018 at 12:22 AM

    I am thankful for this blog to gave me much knowledge regarding my area of work. I also want to make some addition on this platform which must be in knowledge of people who really in need. Thanks.
    เร ซิ่น หล่อ ใส

  4. Exactsilicone says:
    December 3, 2018 at 1:49 AM

    Nice blog about silicone rubber product. Thank you for sharing great blog.

  5. Baker Axton says:
    December 26, 2018 at 9:29 PM

    I am grateful for this blog to distribute knowledge about this significant topic. Here I found different segments and now I am going to use these new instructions with new enthusiasm.
    เร ซิ่น

  6. JR Vitug says:
    February 18, 2019 at 2:22 AM

    Great blog!

  7. JR Vitug says:
    March 24, 2019 at 7:43 AM

    Your site is frightfully educational and your articles are brilliant Air Quality Inspection Association

  8. gibsonherry says:
    March 27, 2019 at 4:54 AM

    The depth of articles can easily be felt of this blog. Very precise and straight to the mark. I understood easily the matter of fact which the author of this blog wanted to deliver through his thoughts. Looking for more.
    ยางซิลิโคน ราคา

  9. Hortn Wayes says:
    July 22, 2019 at 3:24 AM

    You are keeping in touch with some Amazing tips. This article truly helped me a great deal. A debt of gratitude is in order for sharing this blog.
    Injection Mold Company | Injection Mold Making

  10. Prayan Learning says:
    August 13, 2019 at 5:31 AM

    Nice post. Mahalakshmi Rubber Products technical team have expertise in compounding of the product according to the specification and usage of the product.

  11. nubsplastics says:
    February 14, 2020 at 11:19 PM

    Thanks for sharing such a nice blog !!!
    We are one of the Best Injection Molding Manufacturers in USA.

  12. Custom Injection Tooling & Molding Manufacturer says:
    October 11, 2023 at 4:41 AM


    Thanks for sharing this valuable info!

    Injection Mold Suppliers China

Post a Comment